|
The
Kingston boiler provides hot water heat in a variety of sizes (78,000 to
235,000 heating capacity BTU/HR) to serve a wide range of homes. An
approved chimney is required.
The
boiler design is proven in service to be reliable. It is easy to
maintain and economical in its purchase price and fuel consumption. The
boiler can be ordered with flame retention Beckett, Carlin or Riello oil
burners.
The boiler features a swing-open burner door that gives full access to
the combustion chamber and burner nozzle. A split jacket provides easy
access to the flue passages of the heat exchanger. The attractive and
durable jacket is powder-coated to resist scratching and insulated to
retain heat. The heat exchangers are constructed to meet the standards
set by the American Society of Mechanical Engineers.
The Kingston has a wet base design in which the heat exchanger surrounds
the combustion chamber on all sides to provide optimum heat transfer.
The result is lower fuel costs. |
|
On
the Kingston steam boiler, the heat exchanger is assembled with steel
push nipples below the water line where resistance to expansion and
contraction is important, and cast iron push nipples above the water
line where corrosion resistance is key. The cast iron push nipples are
larger than usually found on such units to provide optimum steam
quality.
Kingston…the latest in a series of designs that is constructed for long
life, convenient to install and service, and designed to provide the
most value for each energy dollar. That's CROWN's commitment to quality.
|
|
-
Rugged wet base cast iron heat exchanger
-
Swing-open burner door for easy service
-
Choice of three oil burners
-
Attractive split jacket easily removed for servicing
-
Insulated to save energy
-
Fully assembled, ready for installation
-
Factory tested control system
-
Three physical sizes with nine firing rates
-
Combustion chamber with a ceramic fiber target wall with blanket
-
Drain valve |
|
-
Draft regulator
- Oil
solenoid valve
-
Burner twist disconnect plug
-
Twelve year warranty on the cast iron steam heat exchanger
-
Pressure gauge
-
ASME pop safety valve
- 3"
top supply tapping for optimum steam quality
- Low
water cutoff
-
Equipped with connections to add a Mega-Stor indirect domestic water
heater |
